- Accurate results in an average of 5 seconds
- Simply apply blood until the confirmation window fills
- Automatically accounts for natural blood variations, so you can be sure of your results each time you test
- No coding
- The OneTouch Select® Plus Family of Meters has a measurement range 1.1 to 33.3 mmol/L
- Meets the most up-to-date ISO 15197 2013 standard for system accuracy
Intended use
The OneTouch Select® Plus test strips are used with the OneTouch Select® Plus Family of Blood Glucose Monitoring Systems, (OneTouch Select® Plus) for the quantitative measurement of glucose (sugar) in fresh capillary whole blood samples drawn from the fingertips. The OneTouch Select® Plus Family of Blood Glucose Monitoring Systems is intended to be used by a single patient and should not be shared
Important
Please read the OneTouch Select® Plus package insert and the Owner’s Booklet that came with your system before using
Storage and handling
- Keep in a cool, dry place between 5-30℃. Do not refrigerate. Keep away from direct sunlight and heat
- To avoid risk of contamination and damage, store your test strips in their original vial only
- Do not open the test strip vial until you are ready to remove a test strip and perform a test
- Use the test strip immediately after removing it from the vial, especially in high humidity environments
- Do not test with a strip that is bent or damaged
- Tightly close the cap on the vial immediately after use to avoid contamination and damage.Do not bend, cut or modify the test strip in any way
- Test strips are for single use only. Never re-use a test strip that has had blood or control solution applied to it
- Do not allow liquids, dirt, dust blood or control solution to enter the test strip port or the data port
- Make sure your meter and test steps are about the same temperature before you test
- After performing a test, do not return the used test strip to the vial
- Do not use after expiry date
