Say goodbye to scanning the FreeStyle Libre to get your glucose readings. Get glucose readings every 5 minutes on your phone with our mobile app.
 |
Reusable |
 |
Fits on top of the FreeStyle Libre sensor, will require an armband or tape |
 |
Sends readings to mobile app every 5 minutes |
 |
Replaceable battery - can be used multiple times |
 |
Not waterproof |
1. FreeStyle Libre sensor
Wear the Freestyle Libre sensor as per the instructions
2. Download "LinkBluCon" app from the Apple App store/ Google Play store
3. Launch the "LinkBluCon" app by taping on the app icon located on the phone screen.
4. Tap on "OK" , on Getting STARTED screen
5. Press the switch located in the hole on the BluCon with a blunt pin to turn it ON
6. A RED light will flash for a split of a second
6B. Light will turn OFF after turning ON the BluCon
7. Tap on the Scan button located near bottom of the screen. If you gets message no BluCon found, tap again on the 'Scan' button. Keep doing it until displays message, it's connected and reading the data.
8. Enter the 6 digit passcode printed on the side of the BluCon, after the serial number
9. 6 digit passcode is printed after the serial number. Once Blucon is connected to the app, place it above the FreeStyle Libre sensor with the help of armband to see glucose readings on the phone [Sometimes it may take up to 6 minutes before you will see first reading]
10. Glucose reading will be updated every 5 minutes
1. Use a pin to press the switch on the side
2. The old battery will slip out from the side of the BluCon
3. Replace the old battery with the new CR2032 battery
6. Remove old battery
5. Insert new battery as shown
6. BluCon is once again ready for use
